Abstract
The advancement standing industry is looking with the creating interest in improving stunning structures like tall
structures, nuclear power plant structures, long-length ranges, offshore draining stages, rocket take-off stages, immense underground workplaces, etc. For these structures, advanced strong composites with overwhelming execution like high compressive quality, lastingness quality, sway avoidance, heat resistance, and supported strength properties were used. With the event of high assessment cement and responsiveness of sensible mineral admixtures and planned admixtures, it's has been made possible to make concrete with compressive nature of 60MPa, and this idea has energized move to high concrete [HSC]. In the current appraisal, silica smoke and super plasticizers like Steel fibers and Polyester strands won't graph. M60 Grade concrete and subsequently properties are attempted with different test procedures as indicated by IS recommendation.
Keywords
Polyesters, Silica rage, Super plasticizers, Steel strands.
References
1. Alhozaimy, A.M., Soroushian, P.and Mirza.F, (1996), “Mechanical Properties of Polypropylene Fibre Reinforced
Concrete and the Effects of Pozzolanic Materials, Cement and Concrete Composites”, 18, pp.85 - 92.
2. Vidhya, K., & Kandasamy, S. (2014). Study on the flexural strength of coal ash brick masonry wall
elements. Journal of Structural Engineering (India), 41(4), 410–419.
3. Balaguru. P and Najm. H, (2004),” High Performance Fibre Reinforced Concrete Mixture Proportions with
HighFibre Volume Fractions”, ACI Material Journal, 101(4),pp.281-286
4. Sudharsan, N., & Grant, B. C. J. (2018). Comparison of static response of laced reinforced concrete beams with
conventional reinforced concrete beams by numerical investigations. International Journal of Civil Engineering and
Technology, 9(8), 700–704
5. Sudharsan, N., & Palanisamy, T. (2018). A comprehensive study on potential use of waste materials in brick for
sustainable development. Ecology, Environment and Conservation, 24, S339–S343.
6. Vidhya, K., & Kandasamy, S. (2016). Experimental Investigations on the Properties of Coal-Ash Brick Units as
Green Building Materials. International Journal of Coal Preparation and Utilization, 36(6), 318–325.
7. N. Sudharsan, T. Palanisamy, S. C. Yaragal, (2018), Environmental sustainability of waste glass as a valuable
construction material - A critical review. Ecology, Environment and Conservation, 24 pp. S331–S338.
8. Baruah.P and Talukdar.S, (2007), “A Comparative Study of Compressive, Flexural, Tensile and Shear Strength of
Concrete with Fibers of Different Origins”. The Indian Concrete Journal, pp.17-24.
9. Jagannthan.A, (2008), Flexural Behaviour of Hybrid Cement Composites with Polyolefin fibre, Proceedings of
Eighth International Symposium and Workshop on Ferrocement and Thin Reinforced Cement Composites,
Thailand, pp.265-274.
10. Kawamata.A, Mihashi. H, and Fukuyama. H, (2003), “Properties of Hybrid Fibre Reinforced Cement- Based
composites”, Journal of Advanced Concrete Technology, JCI, 1(3), 283-290.
11. Konstantin Sobolev, (2004), “The Development of aNew Method for the Proportioning of Higherformance
Concrete Mixtures”, Cement and Concrete Composites, 26, pp. 901–907.
12. Luigi Biolzi, Gian Luca Guerrini and GianpaoloRosati, (1997), “Overall Structural Behavior of High Strength
Concrete Specimens, Construction and Building Materials”, 11(1), pp. 57-63.
13. Li Jianyong, Yao Yan, (2002), “A Study on Creep And Drying Shrinkage of High Performance Concrete”.Vidhya,
K., & Kandasamy, S. (2013). Study on properties of bricks manufactured using fly ash and pond ash. Pollution
Research, 32(2), 405–409.
14. Sudharsan, N, & Saravanaganesh, S. (2019). Feasibility studies on waste glass powder. International Journal of
Innovative Technology and Exploring Engineering, 8(8), 1644–1647.
15. Sudharsan, N,& Sivalingam, K. (2019). Potential utilization of waste material for sustainable development in
construction industry. International Journal of Recent Technology and Engineering, 8(3), 3435–3438.